SWL IR Remote for HF-150 shown with optional Universal Remote
The SWL IR Remote connects to the HF-150 receiver's KEYPAD port and offers more control over the radio than the optional KPAD-1 or KPAD-2 from the Universal Remote. You get the ability to directly enter frequencies, select modes, move up and down through frequencies by settable step rates, and move up and down through memories.
An optional RS-232C Level Converter in the SWL IR Remote will permit computer operation of the HF-150 through the SWL IR Remote control box and is functionally equivalent to the Lowe IF-150. You do not need the IF-150 for computer operation.
Features
Enter frequency directly to 1Hz in the range of 30kHz to 30MHz.
Increase or decrease frequency using CH in steps of 1Hz, 10Hz, 100Hz, 1kHz, 5kHz, 9kHz, 10kHz, 100kHz, and 1MHz in the range of 30kHz to 30MHz.
Set up to five (5) User Tuning Steps. Useful for detuning frequencies by one half of filter bandwidth or use a very small frequency step to quickly zero-beat in SSB mode.
Recall last directly entered frequency.
Directly select memory channels.
Move up and down through memory channels using CH .
Write VFO frequency and mode to currently selected memory.
Toggle between AM, AMN, LSB, or USB modes.
Toggle between ASF, ASD, ASL, or ASU modes.
Select VFO or Memory mode.
Connect to a computer RS-232C port with optional SWL IR Remote Level Converter.
Settable parameters:
Frequency pacing. You can control the pacing of frequency up and down. This is how fast the frequency changes when you hold the CH keys.
Define up to five User Tuning Steps.
Status LED that shows communications status, settable parameter entry, and clear key operation.
SWL IR Remote for Lowe HF-150. Includes Keypad cable and wall power supply. $89.95
Universal Remote Sold Separately.
SWL IR Remote for Lowe HF-150 with RS-232 Level Converter. Includes Keypad cable and wall power supply. $119.95
